I upgraded from 2.8.2 to 3.3.2 and it all worked fine throughout the upgrade. Except for these:
1: It doesn't recognize me as admin. I've seen several posts about it here, but none of the solutions seem to apply. My user table is empty, obviously, and no changes have been made to the usergroups, so admin is 6, and it recognizes me so it's connecting to the vb2 database correctly
Issue 2 is that the config-inc is filled out correctly, but ends right after
Content visible to verified customers only.
while in the install.htm it mentions a whole lot more. Is the install.html out of date or am i missing half the config-inc?
And 3 , I've set all the paths etc in my config-intr but when I turn vb2 integration on, i end up with a blank page. Something must not be right, but I can't figure out what it is..
That's where it is until I update the DNS with the .net domain. I did follow the upgrade doc, even though it's not very elaborate. Since the old config-inc was missing things, i just updated the one included in the zip. The config-intr was missing entirely. Still doesn't explain how the config-inc content mentioned in the install doc differs from the actual content though
Thats info on install is from an original config versions back
If you have issues please post exact errors
what do you mean it doesnt recognize you? If you replaced an older config that had cookie data with a newer one then thats your issue. You have no cookie settings. You can view the settings table in the database and update settings 213-215 to say this
I am actually using the config-inc that came with RP3.2.3. I changed all the variables in there, and RP works fine. It welcomes me with my username, has everything in it that it should, it just doesn't know I'm an admin. So no admin link, and if i try to goto index-adm.php, it tells me i'm no admin. That's the main issue.
The other issue I'm having, for which i may have overlooked some setting, is that if I turn vb2 integration on in the config-intr, every page i try turns up blank.
Your integrating with vb2? You mean your not running vb3?
well first thing I would suggest you check is using phpmyadmin or other database viewer check your usergroups table in the reviewpost database. Is the usergroup admin with a groupid of 6 have cpaccess set to 1?
Thats what is needed for admin access. You sure your logging in with an admin from usergroup 6?
Yes, i run vb 2.3 with too many modifications to allow me to upgrade. The admin usergroup is 6, and in the RP usergroups - cpaccess is set to 1 for that group. That's why I don't get why it's not working. From what I can tell, everything is set up correctly