PhotoPost Community

PhotoPost Community (http://www.photopost.com/forum/)
-   Photopost Pro Installation & Upgrades (http://www.photopost.com/forum/photopost-pro-installation-upgrades/)
-   -   Upgrade problems ! (http://www.photopost.com/forum/photopost-pro-installation-upgrades/133566-upgrade-problems.html)

barbados September 29th, 2007 07:35 PM

Upgrade problems !
 
2 Attachment(s)
I upgrade fron 5.62 to 6.00 under Vbulletin 3.6.8 shell.

1. After upgrade i have not at all Avatars while in 5.62 i had ! ( I have choose YES in Administration ).

2. I try to Add a budy and it says ok but in my budy list there is not !

3. Yours Quick reply is like that :
In my site is like that :

How can i make my Quick reply like yours ?

Thanks in advance !

Chuck S September 30th, 2007 10:26 AM

Try making sure you download the latest 9-27 build and upload all files except the config files. Make sure you have use Enhanced and WYSIWYG on in Photopost Admin => Edit Integration and in your VB panel use WYSIWYG and your box should look like ours.

As far as add buddy Line 592 of showframe.php the line should be this. There is ) after $photo that should not be there.

Code:

Content visible to verified customers only.

barbados September 30th, 2007 11:36 AM

Thanks Chuck but i have allready done this without success !

I also have seen that when the system makes a middle photo doesn't show Exif informations !

How can i install from start Photopost pro 6.00 without loose the photos and comments ?

I have a big problem !

Thanks for your help !

Chuck S September 30th, 2007 11:45 AM

If you use the current build replace your files and change the one line noted above in showframe.php your add buddy will work. There is no need to rerun an install if you already have the application installed.

barbados September 30th, 2007 12:06 PM

Chuck i have allready done this and i have a lot of problems and not only buddy, smilies are taken from Photopost and not from VB, when the system makes a medium photo dont show exif data and other minnor problems !

My site is pure photographers site and exif is important for them as is the Quick reply !

So if you can tell me how can i make a new install without loose photos and comments ! Is that possible ?

Thanks for helping us !

Chuck S September 30th, 2007 12:12 PM

You can rerun install all you wish but thats not going to help anything. I have addressed each issue you report here.

1. If you have an avatar issue you would need to post true links here to illustrate your issue as I see no avatar issues on my vb3 site so please post your site link.

2. As stated if you apply the bugfix I posted above add a buddy works fine.

3. The comments box is showing fine it is no longer a vb3 enhanced box there on quick reply.

You have not reported any other issues here but your last post says problems but no real explanation.

barbados September 30th, 2007 12:34 PM

Ok ! Lets start with EXIF !!

In your site : http://www.photopost.com/photopost/s...php?photo=6930

This photo has exif data but the programm dont show nothing !

When Photopost makes a medium photo and dont show exif data !

There is a solution for that ?

Thanks for your time !

Chuck S September 30th, 2007 12:59 PM

I see the issue with exif. In image-inc.php find this at line 852

Code:

Content visible to verified customers only.
replace with this and then upload an exif photo and see.

Code:

Content visible to verified customers only.

barbados September 30th, 2007 01:46 PM

Ok Chuck ! I must say that you are very very good ! Problem solved !!

There are some other issues but not so important !

So get some rest and tommorow i will give you the second problem !

For now : Barbados - Chuck = 0-1 :)

Thank you very much Chuck !

Chuck S September 30th, 2007 02:26 PM

enjoy have a good evening

barbados October 1st, 2007 04:07 AM

I wand to ask this :

I will leave Vbulletin 3.6.8 folder and database as it is.
If i erase all the pp- tables from the database and all the files from Photopost pro folder and start a new installation and when i finesh i restore the backup pp_ tables it will work ok ?

Why to do that ? Becouse i have try everything and Quick reply is not working as i have say before ! I always like to have a clean installation !

Thanks in advance Chuck !!

Chuck S October 1st, 2007 09:17 AM

I have explained abovbe quick reply is not going to work like you want it to work. It is now a simple reply box no vb3 enhancements there. Too many compatibility issues so the vb3 box was removed for now till we have time to work out some of those issues.

barbados October 7th, 2007 02:57 AM

Chuck can i go back from version 6.00 to version 5.62 without problems and how can i do that ?

vb 3.6.8 with pp 5.62 has vb3 enhancements in reply box ?

When you plan to upload an error free pp 6.0 version with full vb3 support ?

Thanks in advance !!

Chuck S October 7th, 2007 11:24 AM

I can not say that is up to the developer of Photopost and owner of the company.

You can go back by replacing all your files minus config files with 5.62 files but that requires you to have a copy of 5.62

barbados October 9th, 2007 11:40 AM

1 Attachment(s)
Ok Chuck ! I understand that but when we upgrade i saw that some tables was creating in the database. This can be a problem when i upgrade again in errors free 6.00 version !

Lets continue with issues in verison 6.00

1. In version 6.00 in comments box when we write and we press [Enter] to change line (paragraph) nothing is happen and the comments continues in the same line ! How can i fix that ?

2. In quick reply box table in the right corner there is Attachment 2899 but in Explorer in the same place there is a red X and in Firefox there is nothing !

Thanks in advance !

Chuck S October 9th, 2007 12:35 PM

please reupload all files and post explicit urls here to any left issues. I need to see your site here as any other sites do not appear to have any issues. We have resolved all open bugs.

barbados October 9th, 2007 12:47 PM

Ok ! Chuck !

http://photodp.com/photographers/sho...hp/photo/12685

Chuck S October 9th, 2007 01:31 PM

What exact issue are you trying to explain? You did not post a login so I cant see any comment box so all I can reply on your descriptions of issues which I dont understand what your trying to explain in 1. Now number 2 makes no sense either as if an image shows in one browser it should show in another.

barbados October 9th, 2007 01:33 PM

Where can i send you login informations ?

Chuck S October 9th, 2007 02:50 PM

a regular test user login can be posted here. Just explain your first issue as clear as possible.


All times are GMT -5. The time now is 02:13 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97