Lightbox again...
 

Hi there,

I know, this question comes often, as I already could read in the forum here. But all answers didn't bring me to where I want to be: To enable the LIGHTBOX :mad:

So, here my settings:

Show Photo Options:
Use popup window for BIG images? - Yes
Use lightbox integration? - Yes
Width to trigger lightbox integration (if enabled)? - 1500
Height to trigger lightbox integration (if enabled)? - 1500

Upload Photo Options:
Max allowable image width in pixels - 950
Max allowable image height in pixels - 950
Trigger medium graphic height and width - 500

I also ran a Check DB with all the options enabled except watermark.

Results: No Lightbox, only display the img in page.
What is my mistake I did?

Need help please.

TIA and regards,

adusei

So, now I again changed it to:

Show Photo Options:
Use popup window for BIG images? - Yes
Use lightbox integration? - Yes
Width to trigger lightbox integration (if enabled)? - 450
Height to trigger lightbox integration (if enabled)? - 450

Upload Photo Options:
Max allowable image width in pixels - 980
Max allowable image height in pixels - 980
Trigger medium graphic height and width - 600

And at least I will get a PopUp window, fine.
But where is the LIGHTBOX? I expected something like the lightbox we have in vBulletin...

This all is very much confusing (and not only for me, as it seems).

Hope to get the ultimate tipp ;-)

Best, adusei

Show Photo Options:
Use popup window for BIG images? - Yes
Use lightbox integration? - Yes
Width to trigger lightbox integration (if enabled)? - 1000
Height to trigger lightbox integration (if enabled)? - 1000

Based on your settings that should work. Remember your only going to have a lightbox if there is a medium so any photo over 600 pixels will show lightbox

Buffy - ReefTalk Gallery

What version of Photopost are you using adusei?

@ Chuck

Thanks. But, unfortunately, this is not working either. I uploaded an image with the original size of 850x1275, and with the above metioned changes of yours I dont get any lightbox, neither a popup. What happens is, that the immage will load in the same window glued to the rigth side - very ugly...

@ Geiri

Hi - I downloaded 6.2. But now I had a look in the admin backend and there is the message: PhotoPost 6.2 Now Available! Security Update! Hu? Do I have 6.2 or not? ... Hope so, hehehe...

Edit: Here's a link to check...http://www.thailand-finder.com/redsh...oto=15&cat=500

If your current version is 6.2 then you have the latest.
Do you know your server specs?

The image shows nicely but is 653 x 979 pixels wich should not be enoug to trigger lightbox wich I think you set to 980x980

Trie to upload a bigger photo.

Sorry, but it's confusing me realy. So, here my settings again:

Show Photo Options:
Use popup window for BIG images? - Yes
Use lightbox integration? - Yes
Width to trigger lightbox integration (if enabled)? - 1000
Height to trigger lightbox integration (if enabled)? - 1000

Upload Photo Options:
Max allowable image width in pixels - 980
Max allowable image height in pixels - 980
Trigger medium graphic height and width - 600

So - where do I have to change what to enable the lightbox when? I cannot understand the logic in this system...
I cannot upload an bigger image, because - as I understand - each will be triggered down to 980 according to my settings.

CU,

adusei

So, and when I disable the lightbox - I am at least will get the popup. But the very moment the lb is enabled, I will get the same ugly result...:(

Turn off your vb3 enhanced integration. Does the lightbox work?

Your triggering the lightbox but your page has java issues hense lightbox is crashed.

Yes I would suggest you also redownload the code and make sure your running the latest

Ok, thx so far - will try everything. And report later ;)

Yup Chuck, it's been another java-code and I have to cut it off (but made such nice things, cry...:( )
Ok, the prob is fixed, and thx so much for your patience.

Hm, one little thing left: Please see the attached img, this is my lightbox now, unfortunately there is no close-button to be seen (suppose to be on the right side bottom, correct?). Will confuse the users much. How can I fix it?

TIA and best,

adusei

Yup - fixed :)

Have a good weekend.